Headspace testing is very important to Vegetable MAP packages and shelf-life of the products. Labthink introduces new headspace tester for better fresh keeping guarantee of MAP packages and shelf life.

  Fresh vegetables and fruits are still living organs after picking. They mainly take respiration as main metabolic activity. Since they are separated from the matrix, have no more supply and can only consume the carbohydrate, pectin, vitamins and organic acid to live; this results in quality decline of those vegetables and fruits. The core concerning for vegetable and fruit fresh-keeping is how to slow down respiration and restrain metabolic activity so as to keep vegetables and fruits in dormancy or semi-dormancy status. Besides commonly applied frozen storage, the frequently applied methods include modified frozen storage and complex MAP and frozen storage.       At present, the world advanced fresh keeping method is the above-mentioned complex MAP and frozen storage, which can perfectly combine the modified chain with the frozen storage chain together.

  The principle of complex MAP is to apply complex fresh keeping gas to replace the air inside the plastic packages or boxes so as to change the gas proportion inside the bags or boxes; thus, forms a small modified air environment condition inside the bags or boxes, that is, a small modified air room. Then, with the application of frozen storage, metabolic activity is slow down and freshness is prolonged.

  MAP gas usually consists of carbon dioxide, nitrogen and oxygen. Oxygen content reduction can reduce respiration of the vegetables and fruits and restrain metabolic activity; carbon dioxide concentration improvement can further slow down respiration; nitrogen is one of the inert gases with no effects on the vegetables and fruits and acts as the filling gas. Different vegetables and fruits require different gas proportion, which is mainly determined by the characteristics of the vegetables and fruits themselves. There are certain requirements on gas mix accuracy error and gas replace rate for their complex MAP. In the advanced MAP design standards, a gas replace rate of up to 99.5% is required with less than 2.0% gas mix accuracy error.

  Therefore, in order to achieve fresh keeping, vacuumizing is not enough. Vacuumizing and insert complex gas is the best choice. As to the ratio, headspace analyzer (usually for oxygen and carbon dioxide measurement) should be equipped; and the best ratio should be found according to detailed actual testing. As to your questions, we can not provide you the relevant data at present; this job can only be fulfilled when your company has the relevant testers and detailed testing.

  Labthink introduces Labthink PARAM HGA-01 Headspace Gas Analyzer for the measurement of the content of oxygen, carbon dioxide and mixing proportion in the sealed bags, bottles, cans and other packages.

  It can be used to evaluate package gas contents, mixing proportion rapidly and accurately in production lines, warehouses, laboratories and other occasions, thereby to guide the production and ensure the shelf life.

  Labthink PARAM HGA-01 Headspace Gas Analyzer is of portable design with world leading components; it is one-click operation and double power supply, build-in chargeable battery guarantees fast field measurement. Build-in mini printer for easy result printing; and professional software with functions of data analysis, processing and test report output.

  Further information please feel free to contact Shirley Wu via trade2@labthink.cn, MSN:shirleywu_labthink@hotmail.com or skype:shirley-labthink at Labthink Instruments Co., Ltd.

  Labthink, the excellent provider of testing instruments and testing services, is devoted to provide most excellent and complete quality control solutions for pharmaceutical, foodstuff, cosmetics, packaging, printing, adhesive, automotive, petrochemistry, environment, biology, new energy, construction, aviation and electronic industries worldwide.

No tags

A sauna in one’s apartment in no longer constrained by lack of space or shortage of money. As new and more modern design concepts come up in the architectural domain, a well and ergonomically designed sauna and an adjoining bathroom can be afforded and placed in a lot of homes today.

Bathrooms and adjoining saunas have become more stylish and contemporary, prudent use of space and sophisticated fittings can transform the smallest bathroom and sauna cabin into a glamour room. Designs and structures vary as per the taste and budget of the owner. So, what makes a good sauna and bathroom design? The first and foremost requisite for a good design is that it must be healthy, safe and pleasing. Designers go to details in order to ensure that these attributes are fulfilled.

The designers of a sauna and an adjoining bathroom at the outset look at the needs of the owner. If the structure is required for a larger audience, the design will vary significantly from that required for just a few people. By normal standards, even a small sauna must be able to fit in two people and the traditional size of a sauna available in a most places fits four. The consideration is the space available and the intended users. For apartments and in house saunas, an adjoining bathroom and a shower is recommended in order to save on space. For large community saunas, shower to bather ratio need some consideration so you get the appropriate number of showers.

Unlike saunas in yesteryears, modern saunas have a host of facilities. Running water for one is essential. In case more bathers are utilizing the services of the sauna, the showers need to be appropriately located and norms of privacy maintained. For an apartment, the bathroom next to the sauna will do the job.

When one designs a separate sauna cabin, it must have place for at least four people in the sauna, possibly more. The shower room only needs space for two at the same time since there is usually no rush when bathing and one can wait a while before showering. In addition to the sauna and shower, there should ideally be a dry room to undress and change and it should be between the shower and the remaining part of the house.

Location of a sauna is another important aspect. In case of an in-house affair, it should ideally be placed next to an exterior wall to ensure that proper ducts for ventilation can be arranged. For larger saunas, the location will depend upon the space available and the external environment. The placement and number of benches, and the location and type of heater will all play an important part in the design of larger saunas. A number of benchmarks are available for deciding upon the size, space and location of the benches within a sauna. They all boil down to the convenience and space available within the sauna.

Placement and design of a heater is also very important. The heater should be placed a safe distance away from the door and benches. If the heater is right next to the door of the sauna, the door should be hinged on the heater’s side. This will ensure that there are no burn related incidents within the sauna. The door should open out of the sauna.

Ample amount of spare towels and the other bathroom accessories must be made available. The furniture for a sauna is another aspect which one has to decide upon right at the designing stage. Wood is preferred, but it is expensive. Certain wood substitutes are also available which are gaining popularity in the market.

Overall, the sauna and bathroom must provide the user the intended pleasure and the convenience they have been designed for. Technology and material is available in abundance. What matters is your taste, style and how deep your pockets are.

No tags

Dining tables were first used by the Egyptians. The first dining tables were platforms of wood or metal where food was heaped on. There was no concept of sitting on chairs around the table. Everyone used to come together, gather their food and sat on the ground or chairs and ate their food. The first proper concept of dining tables was evolved in the Grecian period. The Greeks piled their food on the table, sat on chairs around the table and ate together amid a lot of chatting and general conversation. After they finished their food, the tables were pushed under the bed. They used marble, metals like bronze and silver alloys and wood to make these tables and the shape was rectangular. The Romans invented semi-circular tables and called them mensa lunata. Over food and drinks, many strategies and plans were devised around these tables.During the middle ages, there were not many innovations when it came to dining tables. The shapes remained as they were and wood and metals were still used to make these tables. However, the Great Halls came into being. The nobility in Britain and the rest of Europe resided in castles that held a large population. In the dining room, there used to be a raised dais where the family members used to sit and eat. On the lower tables, the rest of the castle population was seated. It was during this time that the trestle tables came into being. For seating, benches were used.In the modern era, in most of the countries, the kitchen doubles up as the dining room. A large dining table is usually placed in the middle of the kitchen. Separate chairs are placed along the table and food is served fresh from the oven. In the larger homes, there is a separate dining room that is used for formal dinner occasions. Traditionally in England, the food is eaten in the dining rooms on Sundays. On the other days of the week, the kitchen works fine.The modern dining tables range from small to very large. There are tables that can seat 4 people and there are tables that can seat in excess of 20 people. The typical dining tables are made of metals and wood. Glass is also an important element in making the dining tables of today.Dining tables have always been the symbol of status. These days, they have become fashion statements too. The more one spends, the better is the quality of the table and the facilities associated with the table. Phrases like brunch and power dinner have come into being. Many strategies are planned on the dining tables and over the years, dining tables have been the place where the family gathers in the morning or at the end of the day, talking about the happenings of the day or conversing in general. Humans are social animals and a dining table is the perfect place to exercise their habit of being among other humans.

Eastenders Meal times should be savoured and enjoyed with pleasant cheerful conversations and good food with our loved ones in a beautiful environment We all need to get back to the table The multi purpose eclectic look It is of course the table that is the key piece of furniture for this space as it will dictate the layout of the rest of the room and be the most imposing

A Storybook Inn s dining hall is outstanding A room so lovely with such rare architectural design one must see it to appreciate it With ornately framed oil paintings adorning the walls

No tags

Is dining room important?

A typical North American dining room will contain a table with chairs arranged along the sides and ends of the table, as well as other pieces of furniture. In modern American homes, the dining room is increasingly used only for formal dining with guests or on special occasions. Informal daily meals are often taken in the kitchen. This was traditionally the case in England, where the dining room would for many families be used only on Sundays, and other meals being eaten in the kitchen. Often tables in modern dining rooms will have a removable leaf to allow for the larger number of people present on those special occasions without taking up extra space when not in use. In Australia, while the use of the dining room is still prevalent, family meals are also often eaten in front of the television in the lounge. Although the “typical” family dining experience is at a wooden table or some sort of kitchen area, some choose to make their dining rooms more comfortable by using couches or comfortable chairs.

Anchored in those reality people will wonder to their self “Is dining room important?”

If talking about dining room is very popular but different. People have their own perception about the existence of dining room in the house or they can make dual function in one room. Therefore, you can answer that question based on your condition now. Some other people said that dining room is not important because I still have sofa in living room. Some other hand dining room is important as the peace corner for all the family members. Whatever your opinion you must agree with me that dining room furniture set is more important than dining room itself. Can you imagine that you have a room at your house called dining room without any dining room furniture set on it? However, dining room furniture set without dining room can function as dining room. Dining room furniture set as if chair and table have several function for the family than dining room itself. After being used for enjoying meal, dining room furniture set can be used as the learning area for kids. In conclusion, is not too much if you have dining room complete with dining room furniture set, you will get functional room in your house.

Credenza with Travertine Top

No tags

If you are looking for DIY energy solutions to save yourself the money that expensive retail solar and wind generators cost, you probably won’t have to look any further than the closest hardware store. Alternate energy is widely perceived as being expensive, and retail systems are, but if you do it yourself and build your own generators you will save lots of money.

DIY energy solutions such as wind power and solar power are the most effective and widely used forms of generating renewable energy. Parts for such builds can be found near your home at local hardware stores.

In the case of building a homemade solar panel, most of the materials that you will need include: Lumber, Silicone Caulk, Plexiglass, Wire, Jones Plugs and Paint. If the parts aren’t already in your garage, one inexpensive trip the the hardware store and you will be on your way.

Other parts will be found online, such as solar cells and diodes. But as for cheap DIY energy solutions, they are inexpensive and easy to come by.

The savings that you keep in your pocket make it well worth looking at DIY energy solutions when taking on a alternative energy project. Most people that take this route will end up saving around 50% of what it would cost to buy retail. Plus if you already have some of the parts around your house you will save even more.

Many people all over the world are catching on about renewable energy. Some because of housing in rural areas, others because of heavy electric bills. Whatever your drive to source DIY energy solutions, your making a good investment in your future.

No tags